Endless polishing lines give the hairline, long - grain or Fine line finish its unique appearance make it more reflective than a NO-4 finish.
The NO.8 finish polish is defined as buffed to a mirror like appearance without any fine polishing line & pinhole defects, truly it is super mirror polish. Widely used in Decorative panel, column cladding & in Interior.
A raised effect achieved with a projection of up to 4mm to 5mm& than if require we can go for Ti-PVD to achieve required colour. As its surface is Anti-skid & reflective surface widely used in elevator industry and interior projects.
It is produced by cutting the surface with the Abrasive belts which remove very small amounts without affecting its thickness. This is non-reflective (low reflective) finish which absorbs surrounding lights & colour.
Etched patterns are created by selectively applying a protective acid resistance film to a highly polished surface & acid etched the unprotected area the etching removes a thin layer of stainless steel changes colour to dull silver grey. The etched pattern can be left as it is or made more reflective.
This technical term is used for Ti-gas Physical Vapour Deposition Process. This is highly resistance to corrosion & No lacquer coating needed. Beautiful colour range achieve like – Gold, Rose Gold, Champaign Gold, Dark Bronze, Slack, Coffee, Copper, Red wine, blue. This is a great replacement of copper Alloy.
Metal Stamping is a manufacturing process in which STAINLESS STEEL SHEETS are fed in a high tonnage press between stamping dies. Due to the pressure of press the desired stamping design is imprinted on the sheet
It has a different look than NO-4 & hairline, but very near to its appearance.
Stainless steel profiles and channels generally called as stainless steel trims are used widely as inlays on floors, walls, ceiling, bathroom decoration, hotels and building lobbies, lift jamb lines and even at malls profiles are installed at shop divider pillars and passage areas.
